Millennium Enterprises Integrated Modeling Amplifier manual Chorus Parameters

Section - 4 Editing Modules

Johnson Millennium

When do I use Chorus? The Chorus effect is so vast in applications, an easier question would probably be “When can’t I use a Chorus. When playing the Blues, turn the Speed and Depth parameters up to produce an almost Leslie-Type effect When trying to add dimension to guitar tone, use the Chorus to thicken-up and add depth to your sound. And, any time your using a clean tone program, guitar always sounds so lush when chorus is added.

Chorus Parameters:

Note: not all of the parameters listed below are available in all Chorus modules.

FX: Lvl	Controls the signal input level fed to the Module. Ranges from Off to 100%.
Dry: Lvl	Controls the level of the dry (uneffected) signal. Ranges from Off to 100%.
Balance	Controls the left/right positioning of the dry signal in the stereo soundfield. Ranges from -99 (all left) to 99 (all right).
Speed	Controls the Low Frequency Oscillator (LFO) speed of the chorus. Ranges from 0.06 to 16.0 Hz.
Depth	Adjusts the intensity of the chorus effect. High settings produce dramatic modulation, while lower settings can be
	used to produce a more subtle, ambient swirling. Ranges from 0 to 30 milliseconds.
Depth 1 - 2	DEPTH1 adjusts the intensity of chorus voices 1-4. DEPTH2 adjusts the intensity of chorus voices 5-8. Ranges from 0
	to 30 milliseconds.
Wander Speed	Controls the secondary LFO speed of chorus voices 5-8. This is a secondary oscillator for voices 5-8 that causes
	deviations from the oscillation path set by DEPTH2. This control can produce radical new textures when used
	creatively. Try setting it slightly faster or slower than SPEED. Ranges from 0.06 to 2.0 Hz.
Wander Depth	Adjusts the intensity of the oscillation deviations produced by WANDER SPEED. WANDER DEPTH produces dramatic
	psycho-acoustic swirling effects when set higher than DEPTH2. Ranges from 0 to 10 milliseconds.
WvFrm	Selects which waveform the LFO follows. Options: sine, triangle, SP1 (special 1), and SP2 (special 2). See figure 3-4
Dly A - B	Controls the delay time of chorus voices A and B. Higher delay time settings produce a more dramatic sweeping
	sound. Ranges from 0 to 60 milliseconds.
Dly C - D	Controls the delay time of chorus voices C and D. Higher delay time settings produce a more dramatic sweeping
	sound. Ranges from 0 to 60 milliseconds
Dly E - H	Controls the delay time of chorus voices E through H. Higher delay time settings produce a more dramatic sweeping
	sound. Ranges from 0 to 60 milliseconds
Out A - B	Adjusts the overall level of chorus voice A or B. Ranges from Off to 100%.
Pan A - B	Controls the placement of chorus voice A or B. Ranges from -99 to 99.

42

User Guide