6)Application Configuration
This page is used to set e-mail and file transmission function.
(1)Recipient E-mail Address This is used to designate a person to receive E-mail.
(2)Sender’s E-mail Address
This is used to put a person’s e-mail address that is considered as the e-mail sender.
This menu plays an important role since this is used for avoiding the problem that e-mails are blocked by some mail servers. Some e-mail serv- ers don’t receive any e-mail that doesn’t have valid domain name such as abc@abc defg.com. It is because there are a lot of junk e-mails. So, in some cases, DX-VS1UE and other de- vices which do not have valid domain names or have only IP address can’t send e-mails. To avoid this problem, DX-VS1UE has the menu to put sender’s e-mail address. The default value is invalid, so administrator should change the address with valid
one. Administrator can put his/her e-mail address.
(1) Check E-Mail Options
Relay Mail Server: Against the same problem as e-mail blocking, DX-VS1UE has a func- tion to relay its e-mail through an available e-mail server so that e-mail can have the relay server’s domain name. After activating “Use Relay Mail Server” menu, you enter a server’s domain name such as ‘@abcdefg.com’. Since the default value of the e-mail server is inva- lid, don’t use the default value when you use the relay mail server function.
Content-Transfer-Type: This shows supported e-mail format. Only ‘Base64’ format is supported.
(2) E-Mail Event Configuration
Event source: Administrator should define in which event E-mail should be delivered among MD (motion detection), sensor 1, sensor 2, sensor3, and sensor 4. If administrator clicks on sensor 1, e-
20
DX-VS1UE User’s Manual
