Multitap method Example To type Card | Mitsubishi Electronics M342i

Multitap method:

Example To type Card:

Press OK and select Messages. Select Write new.

Fill in the To field (see “Sending a new SMS message”, page 24).


In the Text field, press the			until	is displayed. Press	briefly three
times, C is displayed.
Press	until	is displayed. Press		once, a is displayed
Press	three times, r is displayed
Press	once, d is displayed. The word Card is now displayed.

The T9 method:

A press on the down arrow key allows you to swap between T9 text entry and the Multitap meth- od.

1Press the key bearing the required letter once only (the requested character may not be dis- played first).

2The active word changes as you enter text. Enter all the word characters up to the end of the word.

3 If the right word is not displayed when all the characters have been entered, press		until
		until
you get the required word.

4If the requested word does not correspond to the one displayed, press the down arrow key to swap to the multitap method and enter the correct letters.

5Use the left or right arrow keys to move the cursor around the text to insert or delete charac- ters.

To insert a text symbol such as :) or :-) or press two or three times. Press as many times as necessary

to change the symbol to :( or :-( etc.

Tips and Operation

KEYACTION

Short press : to switch mode (T9 or multitap) to lower case, upper case or numeric mode.

Long press : to switch from lower case to upper case. Only the first letter entered

is upper case, the following ones are lower case (e.g.: to write a surname).

Clear		Clear or backspace
		Short press: to enter a space.
		Long press: to access special characters.
		Another matching word
		Smart punctuation
		Short press: moves the cursor to each word beginning		or end		.
		Long press: moves the cursor to the text beginning
		Long press: moves the cursor to the text beginning	or	end	.
		Swap between the T9 and the Multitap method
	Example	To write card: