The call type and the accumulated times of outgoing and incoming calls are dis- played.
Selecting Details displays information on calls made on your home network, on National roaming and on International roaming.
If Line 2 is active too, 'All Calls' for Line 1 and Line 2 are displayed separately.
Balance information (subscription dependent)
This service may be supplied by your service provider. It allows you to view the remaining air- time balance on your phone line.
Please contact your service provider for more information. If your subscription allows access to this information:
1 Press OK. Select Calls & Times.
2Select Call timers.
3Select Balance information.
4Select Call or Set number.
When selecting Call, if the balance information number is already stored, a call is sent to the balance information centre. If no number is stored, select Set number and enter it. Press OK to store the number, then select Call to call the information centre number.
Reminder - call duration
You can set a duration reminder to beep regularly to remind you of the time spent on your call. The frequency can be any multiple of 1 minute (up to 59 minutes).
1 Press OK. Select Calls & Times.
2Select Call timers.
3Select Reminder.
4Select On to activate the Call timer.
5Enter the call timer interval (e.g.: 2 = a beep sounds every 2 minutes whilst in conversation).
6Press OK to validate the entry.
Call timer - reset
This feature allows you to reset the call timers. The 4 digit lock code is required to reset the call timers (default lock code: '0000').
1 Press OK. Select Calls & Times.
2Select Call timers.
3Select Reset.
4Select Yes.
5Enter the phone lock code and press OK.
Call costs - management
Some service providers offer an Advice of Charge (AoC) subscription service allowing you to view the cost of the last call cost, the total calls cost and the remaining balance on your account (once a 'credit limit' has been set ).
To display these, you must first set a currency value and enter an average cost per unit (only calls units are displayed if the cost information is not stored).