To set a currency value per unit:

1 Press OK. Select Calls & Times.

2Select Call costs.

3Select Display cost type.

4Select Currency. The current currency unit value is displayed.

5Select Modify. Enter your PIN 2 code and press OK.

6Enter the currency name (up to 3 letters). Press OK to validate.

7Enter the unit cost (e.g.: 0.15 Euro per minute). And press OK to validate.

To set call cost type to units:

1 Press OK. Select Calls & Times.

2Select Call costs.

3Select Display cost type.

4Select Units.

When the cost type is set to units, the credit limit and the remaining credit are shown in units.

Setting the credit limit (subscription dependent)

You may also be able to set a credit limit to your calls. Once the credit limit has been reached, no more chargeable outgoing or incoming calls are allowed. You can however still make emergency calls.

The PIN2 code is required to set the credit limit.

1 Press OK. Select Calls & Times.

2Select Call costs.

3Select Credit limit. The display indicates the current credit limit set.

4Select Edit. Enter your PIN 2 code and press OK.

5Enter the credit limit (use to enter a decimal point for currencies). Press OK to validate.

When a credit limit has been set, the selection from the 'Credit limit' display is Edit or Set no limit.

Show costs

1 Press OK. Select Calls & Times.

2Select Call costs.

3Select Show.

4Use up and down arrow keys to display the Last Call and All Calls or show the Remaining credits.

The remaining credit is shown in either units or currency, as set by Cost Type menu above.

Call costs - resetting all costs to zero

To reset all call costs to zero:

1 Press OK. Select Calls & Times.

2Select Call costs.

3Select Reset.

4Select Yes.

5Enter the PIN 2 number and press OK.

30-Calls & Times

Page 30
Image 30
Mitsubishi Electronics M342i Select Call costs Select Display cost type, Setting the credit limit subscription dependent