Mitsubishi Electronics M342i manual Mail system, Adjusting text, Sending terminal info, Going back

Adjusting text

The text on webpages may not automatically fit the size of your mobile display. This setting allows you to wrap the text and adjust it so that it fits the screen of your mobile.

Select Wrap text or press .

2Select Yes or No.

3Scroll down as many times as necessary until is highlighted and press OK to validate. Reading certificates

Certificates are used for network security exchange (e.g. for secure payment transactions).

Select Certificates or press .

2Select one of the Certificates available on the mobile and press OK. The selected certificate is then displayed.

Press Cancel (left soft key) to return to the certificates list.

Sending terminal info

To allow or forbid the automatic sending of mobile-related information (linked to the i-mode) to the server.

Select Send terminal info or press .

Select Yes or No.

3Scroll down as many times as necessary until is highlighted and press OK to validate. Setting homepage

To define the homepage address. This allows you to access your favourite webpage via the Go to webpage menu (see "i-mode applications", page 50).

Select Set homepage or press .

Select Valid and enter the http:// address.

3Scroll down as many times as necessary until is highlighted and press OK to validate. Checking the settings

You can check the status of all your settings via this menu.

Select Check settings or press to view the contents of each parameter.

Going back

Select Back or press to go back to the i-mode menu.

Getting back to the main menu
Whilst adjusting or modifying one of the above features, selecting	allows you to go back

to the Settings sub-menu and selecting i-mode allows you to go back to the i-mode main menu. Whilst in the Settings menu, select Cancel, Back or to return to the i-mode main menu.

Mail system

Your mobile allows you to send and receive e-mails and MMS.

However the availability of these features is operator dependent. Please read the following instructions to configure your mail system and use the Mail menu. You can access the i-mode Mail sub-menu in 2 ways:

1 From the standby display select Mail.

or:

1 From the Standby display select i-mode.Select Mail or press .

1.The contents of the Mail menu may vary according to your service provider.

2.Pressing on the left arrow key while navigating the Mail menu leads to the i-mode menu.

3.The maximum e-mail size (on e-mail sending or receiving) is 100Kb (attachment included).t of the message text.

52-i-mode