Chapter 1 - Introduction
LED Indicators
The LEDs on the front of the R100 Wireless Gateway display the status of the device.
PWR (Power)Off | No power |
On | System ready |
Flashing | Firmware upgrade failed |
| AIR (Wireless Network) | |
Off | No power |
On | Wireless system ready |
Flashing | Transmitting or receiving data (wireless) |
| WAN (Wide Area Network) | |
Off | No power |
On | Has physical connection to an Ethernet WAN |
Flashing | Transmitting or receiving data (through Ethernet wire) |
| LAN | |
Off | No power |
On | Has physical connection to an Ethernet LAN |
Flashing | Transmitting or receiving data (through Ethernet wire) |
1. Introduction
R100 Wireless Gateway | 13 |