Chapter 3 - Software Configuration

IP Config in Access Point Mode

Click the IP Config button on the menu to reveal the submenu. Follow the instructions to setup the R100 Wireless Gateway. Tips are given when you move your cursor over each item.

LAN

Selection items:

• Yes (no info required)

• No (need to input information)

Click Apply or Finish if you make any changes.

Get IP Automatically

Select Yes (default) or No to get the IP address automatically from a DHCP server.

Yes

This parameter determines if the R100 will send out a DHCP request during bootup. If you have a DHCP server on the network, set this option so that the R100 can receive an automatic IP address assignment.

If you have a DHCP (Dynamic Host Configuration Protocol) server on the network, then the DHCP server will automatically assign the R100 an IP address when the gateway is powered up. To determine what IP address has been assigned to the R100, review the IP address on the Status page available on the Main Menu.

No

The R100 also accepts a static IP address. You may manually configure the IP address and subnet mask on the IP Config page. Enter an IP address and a subnet mask in the field provided to assign the R100 a static IP address. If you don’t know your Gateway setting, leave it empty (not 0.0.0.0).

3. Utilities

R100 Wireless Gateway

67