Chapter 3 - Software Configuration

IP Config

Click on the IP Config button on the menu to reveal the submenu. Follow the instructions to set up the R100 Wireless Gateway. Tips are displayed when you move your cursor over an item.

Miscellaneous

Enable UPnP – If you select Yes to enable UPnP, it will allow your Wireless Gateway to be found automatically by systems, such as Windows XP. It also allows these systems to automatically configure the Wireless Gateway for various Internet applications, such as gaming and video conferencing.

Remote Log Server – This feature allows you to assign a remote server to record log messages from the R100. If you leave it blank, the system will only record up to 1024 messages on the R100.

Time Zone – This field indicates the time zone where you are located.

NTP Server – NTP Server is a time server on the Internet that allows the wireless gateway to synchronise the system time with it. You can keep the default IP address or set to the IP address of a NTP server that you prefer.

3. Utilities

R100 Wireless Gateway

45