Utilities .3

Chapter 3 - Software Configuration

Wireless

Click on the Wireless button on the menu to reveal the submenu. Follow the instructions to set up the R100 Wireless Gateway. Tips are displayed when you move your cursor over an item.

Access Control

MAC Access Mode

Pull down menu items:

Disable (no info required)

Accept (need to input information)

Reject (need to input information)

To add security, the R100 has the ability to only associate with or not associate with wireless mobile clients that have their MAC address entered into this page.

The default setting of Disable will allow any wireless mobile client to connect. Accept will only allow those entered into this page to connect. Reject will prevent those entered into this page from connecting.

Adding a MAC Address

To add a MAC address, enter the 12 hexadecimal characters into the white box next to MAC Address and click the Add button. The MAC address will be placed in the control list below. Only a total of 31 MAC addresses can be entered into this page so determine which will be the lesser; those you wish to accept or those you wish to reject and click the appropriate MACAccess Mode.

Note: Click the Finish button to save your new settings and restart the R100 Wireless Gateway, or click Save and restart later.

36

R100 Wireless Gateway