Utilities .3

Chapter 3 - Software Configuration

Select No to enter the IP Settings and/or DNS Server addresses manually. Selecting Yes will set the gateway to receive the information autotcanuall4Cliche

To set up your wireless interface, you must first give it an SSID (Service Set Identifier). The SSID is a unique identifier attached to packets sent over WLANs. This identifier emulates a password when a wireless device attempts communication on the WLAN. Because an SSID distinguishes WLANs from each other, access points and wireless devices trying to connect to a WLAN must use the same SSID.

Also, if you want to protect transmitted data, select a middle or high Security Level.

Middle: allows only those users with the same WEP key to connect to this access point and to transmit data using 128-bit WEP encryption.

High: allows only those users with the same WPA pre-shared key to connect to this access point and to transmit data using WPA-PSK (TKIP) encryption.

Click Finish to continue. You will be prompted to save the settings. Click Save&Restart to save and enable the settings to the R100 Wireless Gateway.

26

R100 Wireless Gateway