Chapter 3 - Software Configuration

RTS Threshold (0~2347) – The RTS/CTS (Request to Send/Clear to Send) function is used to minimize collisions among wireless stations. When RTS/CTS is enabled, the gateway refrains from sending a data frame until another RTS/CTS handshake is completed. Enable RTS/ CTS by setting a specific packet size threshold. The default value (2347) is recommended.

DTIM Interval (1~255) – DTIM (Delivery Traffic Indication Message) is a wireless message used to inform clients in Power Saving Mode when the system should wake up to receive broadcast and multicast messages. Type the time interval in which the system will broadcast a DTIM for clients in Power Saving Mode. The default value (3) is recommended.

Beacon Interval (1~65535) – This field indicates the time interval in milliseconds that a system broadcast packet, or beacon, is sent to synchronize the wireless network. The default value (100 milliseconds) is recommended.

Enable Frame Bursting? – This field allows you to enable frame- bursting mode to improve performance with wireless clients that also support frame-bursting.

Enable Radio? - Selecting “Yes” enables the wireless function during user-defined dates and times. Wireless users will not be able to connect on non-selected dates and times.

Date to Enable Radio - This field defines the dates that the wireless function will be enabled.

Time of Day to Enable Radio - This field defines the time range that the wireless function will be enabled on each of the selected dates.

Radio Power - This field defines the transmission strength in +dBm. The default value of 19 is recommended.

3. Utilities

R100 Wireless Gateway

39