Utilities .3

Chapter 3 - Software Configuration

USB Applications

Click the USB Applications button on the menu to reveal the submenu. Follow the instructions to set up the R100 Wireless Gateway. Tips are displayed when you move your cursor over an item.

FTP Server

FTP Server Mode – The R100 features an embedded FTP server for USB storage. Before using the FTP server, ensure that your USB device fulfills the following requirements.

•The FTP server only works with supported USB devices. Supported devices are listed on the Mitsubishi Electric Australia Web site at http://www.MitsubishiElectric.com.au.

•The R100 gateway supports read/write functions for FAT or FAT32 file systems and read-only functions for NTFS (NT file system) with compressed or uncompressed files. Encrypted files are not supported. If your USB storage device is formatted as a FAT or FAT32 file system, configure the FTP server to work from the first partition (partition 0).

•Devices with multi-partitions will be detected; however, only super users and anonymous users can access devices configured with multi- partitions. Other users can only access the directory /ftp_pub or / ftp_pvt/username/ in partition 0.

Note: The R100 only supports USB Storage devices which are recognised as a “Mass Storage Device”. It does not support other types of USB to IDE devices. Most compatible USB storage devices are plug and play; you do not have to power off the gateway when connecting these devices, however, USB external storage cases for IDE devices require you to restart the gateway after you connect them.

54

R100 Wireless Gateway