Chapter 3 - Software Configuration

Wireless

Click on the Wireless button on the menu to reveal the submenu. Follow the instructions to set up the R100 Wireless Gateway. Tips are displayed when you move your cursor over an item.

Radius Setting

This section allows you to set up additional parameters for connection with a RADIUS Server. Values are required for this page when the Authentication Method field in the Wireless - Interface section is set as WPA or Radius with 802.1x. Refer to Authentication Method on page 29.

Server IP Address – specifies the IP address of the RADIUS server to use for 802.1X wireless authentication and dynamic WEP key derivation.

Server Port – specifies the UDP port number used by the RADIUS server.

Connection Secret – specifies the password used to initialise a RADIUS connection.

Note: A RADIUS server is used for remote user authentication and accounting. It is primarily used by Internet Service Providers, but can also be used on any network that needs a centralized authentication function for its workstations.

3. Utilities

R100 Wireless Gateway

37