Utilities .3

Chapter 3 - Software Configuration

IP Config

Click on the IP Config button on the menu to reveal the submenu. Follow the instructions to set up the R100 Wireless Gateway. Tips are displayed when you move your cursor over an item.

WAN & LANWAN Connection Type

The R100 Wireless Gateway supports four connection types to WAN, including Static IP, PPPoE, PPTP and Automatic IP. The WAN setting fields in this page will differ depending on what kind of connection type you select.

WAN IP Setting

These three items are editable only when WAN Connection Type is set as Static IP or PPTP.

IP Address - This is the IP address of the Wireless Gateway as seen on the remote network. If you leave it blank, the gateway will get an IP address from the DHCP Server automatically.

Subnet Mask - This is the Subnet

Mask of the Wireless Gateway as seen on the remote network.

Default Gateway - This is the IP address of the default gateway that allows for contact between the Wireless Gateway and the remote network or host.

WAN DNS Settings

You can set the DNS setting when using any WAN Connection Type (Static IP, PPPoE, or Automatic IP).

Get DNS Server automatically? - Normally this is automatic and you would answer No to the question about manually assigning DNS. If you are given instructions from your ISP to enter DNS addresses, select Yes to manually assign DNS.

40

R100 Wireless Gateway