2. Installation Procedure
Follow these steps to install the R100 Wireless Gateway.
1.Determine the best location for the wireless gateway. Keep in mind the following considerations:
•The length of the Ethernet cable that connects the gateway to the network must not exceed 100 metres.
•Try to place the gateway on a flat, sturdy surface as far from the ground as possible, such as on top of a desk or bookcase, keeping clear of obstructions and away from direct sunlight.
•Try to position the gateway in a centralised position, so that it will provide coverage to all of the wireless mobile devices in the area. Orientating the antenna vertically should provide the best reception.
•Use only the power supply that came with this unit. Other power supplies may fit but the voltage and power may not be compatible.
2.Wall mounting or vertical standing is also possible.
3.LAN Connection:Attach one end of an
4.Power Connection: The gateway requires power from an external power supply. The gateway ships with a UL listed, Class 2 power supply (5V, 2A). Attach one end of the DC power adapter to the back of the R100 and the other end to a power outlet.
The Power LED on the front of the R100 will light up when the unit is powered ON. In addition, the blue LAN or WAN LEDs will turn ON to indicate that the gateway has a physical Ethernet network connection.
14 | R100 Wireless Gateway |