Chapter 3 - Software Configuration

NAT Settings

Click the NAT Settings button on the menu to reveal the submenu. Follow the instructions to set up the R100 Wireless Gateway. Tips are given when you move your cursor over each item.

Port Trigger

This function allows you to open certain TCP or UDP ports to communicate with the computers connected to the R100. This is done by defining trigger ports and incoming ports. When the trigger port is detected, the inbound packets to the specified incoming port numbers are redirected to your computer.

Enable Port Trigger? - Selecting Yes applies all the rules in the Port Trigger List to the Wireless Gateway.

Well Known Applications - This selects protocols associated with certain applications that can be used with Port Trigger.

Trigger Port List

Trigger Port - This field allows you to enter the port or port range of outgoing packets that will trigger port redirect.

Protocol - This field allows you to select the protocol of outgoing packets.

Incoming Port - This field allows you to enter the port or port range of incoming packets that will be redirected to your computer. Description –This field allows you to record what this rule is used for.

3. Utilities

R100 Wireless Gateway

47