Chapter 3 - Software Configuration

System Setup

Click the System Setup button on the menu to reveal the submenu. Follow the instructions to set up the R100 Wireless Gateway. Tips are given when you move your cursor over each item.

Factory DefaultRestoring Factory Default SettingsWeb Manager

You can reset all settings to their factory defaults through the web manager using the Factory Default page. Click the Restore button and wait about 30 seconds before re-accessing the R100.

Hardware

You can reset all settings to their factory defaults manually by pushing the Restore button in the hole on the back of the R100 while it is ON. Use a pen or straightened paper clip to hold the Restore button depressed over 5 seconds until the power LED on the front of the R100 starts blinking slowly.

You will be notified when factory default settings are restored while using the web manager.

3. Utilities

R100 Wireless Gateway

71