Monarch 9406 manual Supply Type

3. Setting Supply Options

3.Press Q to exit to the Setup menu.

NOTE: If you set the Ribbon option to Yes, be sure you install a ribbon before printing.

4.Press Q to exit to the Main Menu.

NOTE: After changing settings in the Setup Menu, always return to the Main Menu before turning your printer off. The printer will not save changes to these menus if you turn it off before returning to the Main Menu.

Supply Type

You can use indexed or non-indexed supplies with the 9406 printer. These supplies are defined as follows:

∙Indexed supplies have marks to indicate the specific length of each label. Supplies with an aperture or black mark are indexed supplies.

∙Non-indexed supplies have no marks to indicate the specific length of the label.

The default setting for Supply Type is Indexed. To change the setting, follow steps listed under "Finding the Supply Options." Then follow the steps below.

1.Press R until you see

	SUPPLY
<	Supply Type	>

2.Press E . You will see the previous setting, for example,

SUPPLY TYPE

<Indexed

Setting Supply Options

3-3