3. Press or to display the number of stop bits you
need, then press . You will see
PORT SETTINGS
< Stopbits >
4. Press to exit to the Setup men u.
5. Press to exit to the Main Menu .
NOTE: After changing settings in the Setup Menu, always
return to the Main Menu bef ore turning your
printer off. The printer will not save changes to
these menus if you turn it off before returning to
the Main Menu.
ParityThe default setting for Parity is None. To change the setting,
follow the steps listed unde r "Finding Communication Value
Options." Then follow the st eps below.
1. Press until you see
PORT SETTINGS
<Parity>
2. Press . You will see the previous setting, for example,
PARIT Y
None >
The options for parity are
None
Odd
Even
Setting Communication
Values
Setting the Communication Values