6. Setting Defaults
The default setting for Monetary Sign is USA. To change the setting, follow the steps listed under "Finding Default Options." Then follow the steps below.
1.Press E . You will see the previous setting, for example
MONETARY SIGN
< USA >
2.Press R or L until you see the country for the monetary sign you want.
3.Press E . You will see
DEFAULTS |
|
Monetary Sign | > |
4.Press Q to exit to the Setup menu.
5.Press Q to exit to the Main Menu.
NOTE: After changing settings in the Setup Menu, always return to the Main Menu before turning your printer off. The printer will not save changes to these menus if you turn it off before returning to the Main Menu.
Secondary Sign
If you select USA as the monetary sign, you can print amounts less than $1.00 either by using a dollar sign and decimal ($ .30) or by using a cent sign (30¢). Note the following facts:
∙If you set the secondary sign option to No, prices under $1.00 will print like this: $ .45
∙If you set the secondary sign option to Yes, prices under $1.00 will print like this: 45¢
The same option applies to monetary signs other than USA.
Setting Defaults
