9406 Operator's Handbook
3.Press R or L to display the parity you need, then press E . You will see
PORT SETTINGS
< Parity >
4.Press Q to exit to the Setup menu.
5.Press Q to exit to the Main Menu.
NOTE: After changing settings in the Setup Menu, always return to the Main Menu before turning your printer off. The printer will not save changes to these menus if you turn it off before returning to the Main Menu.
Flow Control
The default setting for Flow Control is DTR. To change the setting, follow the steps listed under "Finding Communication Value Options." Then follow the steps below.
1.Press R until you see
| PORT SETTINGS |
|
< | Flow Control | > |
2.Press E . You will see the previous setting, for example,
FLOW CONTROL
<DTR
The options for flow control are
None
