Setting the Communication Values
2.Press R or L to display the baud rate you need, then press E . You will see
PORT SETTINGS |
|
Baud rate | > |
3.Press Q to exit to the Setup menu.
4.Press Q to exit to the Main Menu.
NOTE: After changing settings in the Setup Menu, always return to the Main Menu before turning your printer off. The printer will not save changes to these menus if you turn it off before returning to the Main Menu.
Word Length
The default setting for Word Length is 8. To change the setting, follow the steps listed under "Finding Communication Value Options." Then follow the steps below.
1.Press R until you see
| PORT SETTINGS |
|
< | Word Length | > |
2.Press E . You will see the previous setting, for example,
WORD LENGTH
<8
The options for Word Length are
7
8
Values | Setting Communication |
|
|
