The default setting for Print Position is 0. To change the
setting, follow the steps listed under "Finding the Suppl y
Options." Then follow the st eps below.
1. Press until you see
SUPPLY
<Print Pos>
2. Press . You will see the previous setting, for example
Enter print pos
[+/-999]: +0
3. Use the arrow keys to change the print position. Pressi ng
increases the value (moves the image up);
decreases it (moves the image down).
4. Press when the number you want is di splayed. You
will see
SUPPLY
<Print Pos>
5. Press to exit to the Setup men u.
6. Press to exit to the Main Menu .
NOTE: After changing settings in the Setup Menu, always
return to the Main Menu bef ore turning your
printer off. The printer will not save changes to
these menus if you turn it off before returning to
the Main Menu.
Setting Supply Options
3. Setting Supply Options
3-7