Monarch 9406 manual Supply Position

9406 Operator's Handbook

Supply Position

This function adjusts how much supply feeds out of the exit chute. You may need to adjust the supply in or out to allow:

∙Labels to be torn off

∙Die cut labels to be removed easily, or to prevent them from falling off.

The range is -99 to +99, and the default is 0. The larger the number is, the more supply feeds out of the chute. The adjustments are in dots (0.0052 inch).

NOTE: If you change this value in the middle of a batch, the change is immediate. It does not wait for the next batch to make the change.

The default setting for Supply Position is 0. To change the setting, follow the steps listed under "Finding the Supply Options." Then follow the steps below.

1.Press Rr until you see

	SUPPLY
<	Supply Pos	>

2.Press E . You will see the previous setting, for example

Enter supply pos [+/-99]: +0

3.Use the arrow keys to change the supply position. Pressing R increases the value (feeds more supply); L decreases it (feeds less supply).

4.Press E when the number you want is displayed. You will see

	SUPPLY
<	Supply Pos	>

3-8