Monessen Hearth BWBC400I, BWB400 See for Illustration of Fireplace Components Described below

FIREPLACE COMPONENTS

SEE FIGURE 13 FOR ILLUSTRATION OF FIREPLACE COMPONENTS DESCRIBED BELOW.

MODEL	DESCRIPTION
SF36A	36-inch radiant fireplace.
SF36AI	36-inch insulated radiant fireplace.
SCF36A	36-inch circulating fireplace.
SCF36AI	36-inch insulated circulating fireplace.
GD36PB	Optional 36-inch polished brass bifold glass door kit. Frame has polished brass finish; tempered glass is clear.
GD36B	Optional 36-inch black bifold glass door kit. Frame has black finish; tempered glass is clear.
SCS	Chimney support. (Required when chimney height exceeds 30 feet.)
SE30	Elbow offset/return package containing two 8-inch diameter 30-degree elbows.

6120 to 6/12 variable pitch roof flashing. One 612 flashing required with SC round chimney cap on 0 to 6/12 pitch roof.

1212	6/12 to 12/12 variable pitch roof flashing. One 1212 flashing required with SC round chimney cap on 6/12 to 12/12
	pitch roof.
SC	Round chimney cap for contemporary installation; includes storm collar.
SF	14-1/2" firestop spacer. One required at each ceiling or floor level.
SCL	Round chimney cap with telescoping pipe and storm collar. For chase installation.
SQ8	Square termination chimney cap (18-1/2" x 18-1/2") for chase installation. Use with VFK flashing kit.
SF30	Firestop spacer for 30-degree chimney incline through ceiling or floor.
H1652	16-inch x 52-inch hearth extension for protecting floor against sparks and radiant heat.
AK4	4-inch diameter outside combustion air kit. Allows air from outside to enter fireplace. (For residential homes.)
AK6	6-inch diameter outside combustion air kit. Allows air from outside to enter fireplace. (For manufactured homes.)
FP4U	4-inch diameter x 8-feet long flexible uninsulated combustion air duct. Use with AK4 kit.
FP6U	6-inch diameter x 8-feet long flexible uninsulated combustion air duct. Use with AK6 kit.
403	4-inch duct connector for splicing FP4U ducts. (Includes one connector and two clamps.)
603	6-inch duct connector for splicing FP6U ducts. (Includes one connector and two clamps.)
FA2	Optional fan kit, with switch. The FA2 fan installs behind the lower grille of the SCF36A and SCF36AI fireplaces.
	(For SCF36A and SCF36AI fireplaces.)
JB1	Junction box - For Optional FA2 Fan installation on SCF36A and SCF36AI fireplaces. The JB1 junction box must
	be installed at the time of fireplace installation if the FA2 Fan is to be installed at any time.
S8	8-inch diameter double-wall telescope pipe for use with LFSQT chimney cap.
LFSQT	Square shroud termination chimney cap for chase installation. Use with S8 telescope pipe and VFK flashing kit.

￿(Minimum chase top dimensions: 26" x 26".)

SPC	Pyramid shroud termination chimney cap for chase installation.
H36	Hood for heat deflection. Hood may be installed on fireplace in residential type home to reduce the recommended
	clearance to a combustible mante. This hood is not for use with glass doors.
R3672	36" x 72" flat chase flashing with single flue hole.
R4884	48" x 84" flat chase flashing with single flue hole.
CF8	Terra Cotta masonry-look termination chimney cap for chase installation. Use with VFK flashing kit.
VFK	Vent flashing kit consisting of adjustable radiation shield with spacer brackets and fasteners.
	(For venting a field-constructed flashing assembly on a combustible chase top.)
S48	48-inch long x 8-inch diameter chimney flue section.
S36	36-inch long x 8-inch diameter chimney flue section.
S18	18-inch long x 8-inch diameter chimney flue section.
S12	12-inch long x 8-inch diameter chimney flue section.

: DENOTES FIREPLACE COMPONENTS NOT ILLUSTRATED BY CORRESPONDING FIGURE.

13

53D9031. Rev 1 03/03