Phone Programming
3Enter the name of the individual you want to store. (Notice, each key has a number and several letters. To select different letters
on a key, quickly press the key until the desired letter displays. For example, to enter the letter Y you must press 9 3 times quickly. Also, you can press and hold # to change the case of the letter you just
NOTE: Press the left side of lr to backspace or delete a let- ter. Press the right side of lrto insert a space.
After you have entered the name, pressounder “Store.”
4Enter Phone Number displays. Enter the area code and phone number.
Remember to add plus and pause entries if desired. See “Pause Digit Entry” on page 27 and “Plus Dialing” on page 35.
Pressounder “Store.”
5The name and Spd# = displays. The system automatically
assigns a Speed Dial number which you can change by entering a new number. Pressounder “Store.”
6Enter PrvtID displays. Enter the Direct Connect Private ID. Pressounder “Store.” If you do not wish to store a Private ID, press ounder “Skip.”
7Repeat steps 2 through 6 to add additional names/numbers.
8Pressounder “Exit” when you have finished.
Pause Digit Entry
When storing a number, you can program your phone so that it will not only dial a number but also pause and enter another series of numbers such as a personal identification number (PIN) or password. This
27
