Motorola manual MVME6100 vmeCfg -s -o1

Chapter 3 MOTLoad Firmware

Inbound window 0 (ITAT0) is not enabled; Virtual FIFO at 256 bytes, 2eSST timing at SST320, respond to 2eSST, 2eVME, MBLT, and BLT cycles, A32 address space, respond to Supervisor, User, Program, and Data cycles. Image maps from 0x00000000 to 0x1FFF0000 on the VMbus, translates 1x1 to the PCI-X bus (thus 1x1 to local memory). To enable this window, set bit 31 of ITAT0 to 1.

Note For Inbound Translations, the Upper Translation Offset Register needs to be set to 0xFFFFFFFF to ensure proper translations to the PCI-X Local Bus.

■MVME6100> vmeCfg –s –o1

Displaying the	selected Default VME		Setting
- interpreted as		follows:
Outbound Image	1	Attribute Register	= 80001462
Outbound Image	1	Starting Address Upper Register		=	00000000
Outbound Image	1	Starting Address Lower Register		=	91000000
Outbound Image	1	Ending Address Upper Register =		00000000
Outbound Image	1	Ending Address Lower Register =		AFFF0000
Outbound Image	1	Translation Offset	Upper Register		= 00000000
Outbound Image	1	Translation Offset	Lower Register		= 70000000
Outbound Image	1	2eSST Broadcast Select Register		=	00000000
MVME6100>

Outbound window 1 (OTAT1) is enabled, 2eSST timing at SST320, transfer mode of 2eSST, A32/D32 Supervisory access. The window accepts transfers on the PCI-X Local Bus from 0x91000000-0xAFFF0000 and translates them onto the VMEbus using an offset of 0x70000000, thus an access to 0x91000000 on the PCI-X Local Bus becomes an access to 0x01000000 on the VMEbus.

■MVME6100> vmeCfg –s –o2

Displaying the	selected Default VME		Setting
- interpreted as		follows:
Outbound Image	2	Attribute Register	= 80001061
Outbound Image	2	Starting Address Upper Register		=	00000000
Outbound Image	2	Starting Address Lower Register		=	B0000000
Outbound Image	2	Ending Address Upper Register =		00000000
Outbound Image	2	Ending Address Lower Register =		B0FF0000
Outbound Image	2	Translation Offset	Upper Register		= 00000000
Outbound Image	2	Translation Offset	Lower Register		= 40000000
Outbound Image	2	2eSST Broadcast Select Register		=	00000000
MVME6100>

Outbound window 2 (OTAT2) is enabled, 2eSST timing at SST320, transfer mode of SCT, A24/D32 Supervisory access. The window accepts transfers on the PCI-X Local Bus from 0xB0000000-0xB0FF0000 and translates them onto the VMEbus using an offset of 0x40000000, thus an access to 0xB0000000 on the PCI-X Local Bus becomes an access to 0xF0000000 on the VMEbus.

■MVME6100> vmeCfg –s –o3

Displaying the		selected Default VME		Setting
- interpreted as			follows:
Outbound Image		3	Attribute Register	= 80001061
Outbound	Image	3	Starting Address Upper		Register = 00000000
Outbound	Image	3	Starting Address Lower		Register = B3FF0000

24MVME6100 Installation and Use (V6100A/IH2)