B
Advanced Port Filtering Page
Define port filters to prevent all devices from sending outgoing TCP/UDP traffic to the WAN on specific IP port numbers. Specify a starting and ending port range to determine what TCP/UDP traffic is allowed out to the WAN on a
Note: The specified port ranges are blocked for ALL PCs. This setting is not IP address or MAC address specific. For example, to block all PCs on the private LAN from accessing HTTP sites, set the “Start Port” to 80, “End Port” to 80, “Protocol” to TCP, select Enabled, and then click
Apply.
| Field Descriptions for the Advanced Port Filtering Page |
|
|
Field | Description |
|
|
Start Port | Enter the starting port number. |
|
|
End Port | Enter the ending port number. |
|
|
Protocol | Select TCP, UDP, or Both from the |
|
|
Enabled | Select to activate the IP port filters. |
|
|
Advanced Port Forwarding Page
Run a publicly accessible server on the LAN by specifying the mapping of TCP/UDP ports to a local PC. This enables incoming requests on specific port numbers to reach web
6 • Advanced Pages | 35 |
