Motorola SVG1501UE, SVG1501E manual Rear Panel, Description, 1 TEL1/2, Reset, Overview

B

Rear Panel

Both the SVG1501 and SVG1501U (shown above) rear panels contain the following cabling port and connectors:

	Item	Description
1 TEL1/2		VoIP connection for a single or two-line telephone
	TEL 2	VoIP connection for a single-line telephone

2ETHERNET Use any Ethernet port to connect an Ethernet-equipped computer, hub,

1 2 3 4 bridge, or switch using an RJ-45 cable.

		Activity LED — Green LED defines the activity of the Ethernet connector.
		When LED is ON, there is no data traffic and a connection is stabilized.
		When LED is FLASHING, data is being transmitted upstream or
		downstream.
		When LED is OFF, the unit is not powered or there is no Ethernet
		connection.
		10/100 LED — Indicates the connection data rate.
		When Green LED is ON, the connection is at a 100Base-T rate.
		When Amber LED is ON, the connection is at a 10Base-T rate.
3	RESET	Resets the wireless voice gateway. It may take 5 to 30 minutes to find
		and lock on the appropriate communications channels.
		Press and hold the RESET button for five seconds or longer to restore the
		factory default settings.
4	USB	For Windows only, you can use the USB port to connect a PC to the
1 • Overview		6