Motorola SVG1501E Field, Description, Remote Endpoint Settings, Address group type, Identity type

B

Field	Description
Remote Endpoint Settings	Set the remote VPN access group to one of the following
Address group type	group types:
	Single IP address — for one computer, enter the IP address
	for the specific computer
	IP address range — for a small range of computers, enter the
	starting and ending IP addresses for the group of consecutive
	IP addresses to have access to the VPN tunnel.
	IP Subnet — for an entire subnet/network, enter the Subnet
	and Mask
	For IP address range and IP Subnet, enter the starting and
	ending IP addresses for the group of consecutive IP addresses
	to have access to the VPN tunnel.
	The remote VPN endpoint on the other side of the tunnel
	should match these settings for its local endpoint settings.
Identity type	Define the remote endpoint identity type to automatically use
	the remote endpoint IP address, or as a user-specified IP
	address, fully qualified domain name (FQDN), or e-mail
	address. This is the identity that the far endpoint uses for
	identification of the VPN termination point and handshake.
	The remote VPN endpoint on the other side of the tunnel
	should match these settings for its local endpoint settings.
Identity	Enter the identity string:
	For IP address, enter x.x.x.x.
	For FQDN, enter yourdomain.com
	For email address identity, enter yourname@yourdomain.com
	The remote VPN endpoint on the other side of the tunnel
	should match the settings here for its local endpoint settings.
Network address type	Select the remote endpoint’s WAN address type: IP address or
	Fully Qualified Domain Name (FQDN)
Remote Address	Enter either the IP address of the remote endpoint or its
	FQDN.
IPsec Settings	Associate one of the two phases of Security Association (SA)
	to the VPN tunnel. Phase 1 creates an IKE SA. After Phase 1 is
	completed, Phase 2 creates one or more IPSEC SAs, which are
	then used to key IPSEC sessions.
Pre-shared key	Enter the “Pre-shared Key” field if one side of the VPN tunnel
	is using a unique firewall identifier (or Pre-shared Key.

10 • VPN Pages 61