SECTION 1 | OVERVIEW |
|
|
LED Description
The underlined items represent network activity.
| LED | Condition | Color | Status |
1 | Power | ON | Green | The device is powered on and operating normally. |
|
| Blinking | Green | Firmware update is in progress. |
|
| Blinking/ON | Red | The power LED turns RED as soon as the reset |
|
|
|
| button is depressed. If the reset button is held down |
|
|
|
| for more than 5 seconds, the LED starts to blink |
|
|
|
| during which the access point’s default user name, |
|
|
|
| password and IP address will be restored. The LED |
|
|
|
| then turns OFF until the reset button is released. The |
|
|
|
| power LED blinks RED if the firmware is corrupted |
|
|
|
| indicating the firmware needs to be restored. |
2 Wireless | OFF | None | No mobile station or access point has been | |
|
|
|
| associated with this device. |
|
| ON | Red | The wireless interface has been disabled by the |
|
|
|
| firmware. |
|
| ON/Blinking | Green | 802.11b/802.11g connection exists in this wireless |
|
|
|
| domain/active traffic present. |
3 | Device | OFF | None | No external Ethernet device has been attached and |
|
|
|
| detected. The Ethernet link is down. |
|
| ON/Blinking | Amber | 10BaseT link detected/active traffic present. |
|
| ON/Blinking | Green | 100BaseT link detected/active traffic present. |
WA840G |
