Motorola WA840G manual Configuration, Navigation, Help, Restart, and Logout, Unit

SECTION 3 CONFIGURATION

2Enter the User ID. The default factory setting is admin.

3Enter the Password. The default factory setting is motorola.

After you have logged in, for security reasons you should change the User ID and Password. See below.

4Click Log In to enter the access point’s Configuration Utility.

Navigation

Each of the following subsections describe the components of the access point’s Configuration Utility, which is accessible from a web browser. These sections include:

To navigate, click on a major section and then the associated subsection. For example, to adjust the User Login ID, click CONTROL PANEL on the left, then DEVICE SECURITY tab at top on the right. The Web-based Configuration Utility uses Javascript. Your web browser’s Javascript needs to be enabled.

Help, Restart, and Logout

Click on the appropriate command to execute the action.

Help	Accesses Help.
Restart	Restarts your session with the Configuration Utility. When
	Restart flashes, the change you have made requires that
	you restart the unit.
	For convenience, it is recommended that you finish
	all of your configuration changes and then restart the
	unit.
Logout	Logs out of the access point’s Configuration Utility.

3-2 WA840G