Motorola WA840G Configure Your Computers, Not using Dhcp Continue to use the Static IP settings

SECTION 2 INSTALLATION

INPUT VOLTAGE: +5VDC, 2A

FCC ID: F2NWA840G

MODEL: WA840G

Tested To Comply

With FCC Standards

FOR HOME OR OFFICE USE

	MODEL WA840G
INPUT VOLTAGE: +5VDC, 2A	PART NUMBER: AAAAAA-BBB-CC
FCC ID: F2NWA840G	S/N: PPPPMMYJJJSSSSSCAABBCCCC
MODEL: WA840G
Tested To Comply	WIRELESS MAC: AB CD EF 01 23 45
With FCC Standards
FO R HOM E OR OF FICE U SE
	MADE IN TAIWAN

MODEL WA840G

PART NUMBER: AAAAAA-BBB-CC

S/N: PPPPMMYJJJSSSSSCAABBCCCC

WIRELESS MAC: AB CD EF 01 23 45

MADE IN TAIWAN

MAC address

2The default setting is motorola appended with the last 3 characters of the Wireless MAC address (an example SSID: motorola 345) and that no encryption and authentication are enabled.

3To configure the initial settings of the access point, please see Configure your Computers.

Configure Your Computers

For initial configuration, you need to configure the PC’s network setting to specify a static IP address for the computer that is going to communicate with the access point.

After initial configuration:

If…	Then…
Using DHCP	Reconfigure the PC’s settings to Obtain An IP
	Address Automatically.
Not using DHCP	Continue to use the Static IP settings.

This section includes information on configuring computers with the following operating systems:

!Windows® 98SE

!Windows ME®

!Windows® 2000

!Windows XP™

Determine the operating system for each computer you will include in your wireless network and follow the steps to configure the network settings for that PC.

2-10 WA840G