Personalize Moxi Cable HD DVR
To use the Moxi 3012 to change the widescreen settings, do the fol- lowing
1.Go to the Widescreen card in the Settings category.
2.Select the desired output setting (for example, cropped, wide mode, or letter box), and then choose close.
HDTV Setup
The Moxi 3012 automatically adjusts the video output to match the broadcast format and the selections you make in the HDTV Setup card.
The video resolution options are 480i, 480p, 720p, and 1080i. Always use the best resolution allowed by your TV. The following table dis- plays which resolutions are supported by which cables.
Table 1: Video connections and supported resolutions
Connection | 480i (SD) | 480p | 720p | 1080i |
|
|
|
|
|
HDMI digital video | X | X | X | X |
|
|
|
|
|
Component video | X | X | X | X |
(YPbPr) |
|
|
|
|
|
|
|
|
|
X |
|
|
| |
|
|
|
|
|
Composite video (V) | X |
|
|
|
|
|
|
|
|
RF (some models) | X |
|
|
|
Table 1: Video connections and supported resolutions (Continued)
Connection | 480i (SD) | 480p | 720p | 1080i |
|
|
|
|
|
IEEE 1394 (does not | X | X | X | X |
show user interface |
|
|
|
|
graphics) |
|
|
|
|
|
|
|
|
|
For information on audio cables, see table 4 on page 54.
If the screen goes blank after you select a video resolution in error, do not push any buttons, but wait thirty seconds for video to come back. If it does not, see No video displayed on page 46 to fix it.
Setting standard TV video resolution
If your TV is a standard definition (SD) TV, make sure 480i is the only box checked. All other video resolutions will be output at 480i. You can still watch HD channels and they may look considerably better than their SD counterparts.
40
