Multi-Tech Systems MT2834BR, MT2834BLR manual Commands

	Chapter 4 - Commands
COMMAND:	$An
VALUES:	n = 0 or 1
DEFAULT:	$A0
DESCRIPTION:	$A0 discards data during auto-reliable time period. $A1
	buffers data during auto-reliable time period.
COMMAND:	#An
VALUES:	n = 0 thru 3
DEFAULT:	#A0
DESCRIPTION:	#A0 selects initial handshake at 33600 to 31200 to 28800
	to 24000 to 21600 to 19200 to 16800 to 14400 to 12000 to
	9600 to 4800 to 2400 to 1200 to 300 bps.
	#A1 selects initial handshake at 33600 bps only.
	#A2 selects initial handshake at 33600 to 31200 to 28800
	to 24000 to 21600 to 19200 to 16800 to 14400 to 9600 to
	4800 bps.
	#A3 selects initial handshake at 2400 to 1200 to 300 bps.
COMMAND:	Bn
VALUES:	n = 0 or 1
DEFAULT:	B0
DESCRIPTION:	B0 selects V.21 for 300 bps operation.
	B1 selects for 300 bps operation (not used on International
	Models).
COMMAND:	&Bn
VALUES:	n = 0 or 1
DEFAULT:	&B0
DESCRIPTION:	&B0 selects normal transmit buffer size.
	&B1 selects reduced transmit buffer size.
COMMAND:	&BSn
VALUES:	n = 0 or 1
DEFAULT:	&BS1
DESCRIPTION:	&BS0 selects maximum transmit block size of 64
	characters.
	&BS1 selects maximum transmit block size of 256
	characters (MNP mode) or 128 characters (LAP-M mode).
COMMAND:	$BAn
VALUES:	n = 0 or 1
DEFAULT:	$BA0
DESCRIPTION:	$BA0 selects speed conversion on.
	$BA1 selects speed conversion off.
COMMAND:	&Cn

33