Multi-Tech Systems MT2834BLR, MT2834BR manual Callback password with xxxxxx being callback password

	Chapter 4 - Commands
DEFAULT:	n/a
DESCRIPTION:	Callback password with xxxxxx being callback password
	and yy being the memory location. Callback password
	xxxxxx must start with a non-numeric character and upper/
	lower case sensitive. Callback password xxxxxx must be a
	mini mum of 6 and maximum of 10 characters. yy memory
	locations are from 0 to 29. Must T (tone) dialing in string.
COMMAND:	+ - Dxxxxxx???Nxx
VALUES:	n/a
DEFAULT:	n/a
DESCRIPTION:	Callback Phone Numbers xxxxxx with the + preceding the
	phone number indicating the callback modem phone
	number for the corresponding password at the same
	memory location. The (-) preceding the phone number
	enables direct entry when the caller uses the correct
	password without the callback modem having to return the
	call. The ??? entry at the end of the phone number
	represents an extension added to the main phone number.
	The Nxx is the memory location of the callback phone
	number and password.
COMMAND:	#Pn
VALUES:	n= 0, 1, or 2
DEFAULT:	#P0
DESCRIPTION:	Parity of the prompt messages sent by the callback
	modem.
	#P0 is no parity.
	#P1 is odd parity.
	#P2 is even parity.
COMMAND:	#RCBNxx
VALUES:	n/a
DEFAULT:	n/a
DESCRIPTION:	Erases the callback password stored at memory location
	xx. Memory locations are 0 to 29.
COMMAND:	#RDNxx
VALUES:	n/a
DEFAULT:	n/a
DESCRIPTION:	Erases the callback phone number stored at memory
	location xx. Memory locations are 0 to 29.

44