Multi-Tech Systems MT2834BLR, MT2834BR manual AT Commands and S-Register Summary

4.2	S-Registers		48
4.3	Result Codes		52
	4.3.1 AT Commands and S-Register Summary		55
Chapter 5 - Modem Testing			56
5.1	Local Analog Loopback Test/V.54 Loop 3		57
5.2	Digital Loopback Test/V.54 Loop 2
	(Local/Manual)		58
5.3	Digital Loopback Test/V.54 Loop 2
	(Remote/Automatic)		60
5.4	Local Analog Loopback Test
	(Synchronous Mode)		61
5.5	Digital Loopback Test (Local/Manual)
	(Synchronous Mode)		62
5.6	Digital Loopback Test (Remote/Automatic)
	(Synchronous Mode)		63
Chapter 6 - Warranty and Service			64
6.1	Introduction		65
6.2	Limited Warranty		65
6.3	Tech Support		66
	6.3.1	Recording Modem Information	66
	6.3.2	Service	66
6.4	Upgrading the MT2834BR		67
	6.4.1 Using FlashPro to Upgrade Modem Firmware		67
6.5	Safety Warnings		68
6.6	Internet		69
Chapter 7 - BABT Requirements			70
7.1	Compliance with BABT Requirements		71
	7.1.1 European Low Voltage Directive		72

7.1.2Compliance with BS6305 Clause 6.2, BS6320

Clause 7.2, and BABT/SITS/82/005S/D	72
7.1.3 Compliance with BS6789: Section 3.1 and Part 2 ...	73
7.1.4 Compliance with BS6328 Part 1	74
Appendices	75
Appendix A	76
FCC Regulations for Telephone Line Interconnection	76
Canadian Limitations Notice	78
Appendix B	79
Technical Specifications	79
Index	84