Chapter 4 - Commands
S25 |
|
DTR Dropout Time |
|
Unit: | 100 mSec. |
Range: | 0, 1 through 255 |
Default: | 0 |
Description: | Defines DTR dropout time. 0 default equals 50ms. |
S26
Failed Password Attempts
Unit: | 1 failed attempt |
Range: | |
Default: | 0 |
Description: | Counts the number of times there has been a failed |
| password attempt. |
S29 |
|
Local Inactivity Timer |
|
Unit: | minutes |
Range: | |
Default: | 20 |
Description: | Defines the amount of idle time that can elapse between |
| AT commands after the SETUP password has been |
| entered. |
S30 |
|
Inactivity Timer |
|
Unit: | 1 minute |
Range: | |
Default: | 0 |
Description: | Inactivity timer used to disconnect the modem. |
S32
Time Elapse for Escape Sequence
Unit: | 1 second |
Range: | |
Default: | 20 |
Description: | Sets the duration in which modem waits for a <CR> to be |
| entered during escape sequence execution. |
S34
Buffer Length of Command Mode...After
Unit: | ASCII Character |
Range: | |
Default: | 10 |
Description: | Sets buffer length of command mode after |
| sequence. |
51
