| Chapter 4 - Commands | |
|
| |
|
|
|
VALUES: | n = 0, 1, 2 or 4 | |
DEFAULT: | &C1 | |
DESCRIPTION: | &C0 forces Carrier Detect on. | |
| &C1 lets Carrier Detect act normally. | |
| &C2 lets Carrier Detect drop S24 time on disconnect. | |
| &C4 resets modem when Carrier Detect drops. | |
COMMAND: | &CDn | |
VALUES: | n = 0 or 1 | |
DEFAULT: | &CD0 | |
DESCRIPTION: | &CD0 execute cleardown on disconnect. | |
| &CD1 do not execute cleardown on disconnect. | |
COMMAND: | Ds | |
VALUES: | s = phone # | |
DEFAULT: | n/a | |
DESCRIPTION: | Dial a telephone number “s”, where s may include up to 60 | |
| digits or T, P, R, comma and ; characters. | |
COMMAND: | DsNd | |
VALUES: | s = phone # and d = 0 thru 9 | |
DEFAULT: | n/a | |
DESCRIPTION: | Store telephone number. To store, enter phone number "s", | |
| followed by N, then Directory Number "d". | |
COMMAND: | &Dn | |
VALUES: | n = 0 thru 3 | |
DEFAULT: | &D2 | |
DESCRIPTION: | &D0 means DTR is ignored | |
| &D1 means modem returns to command mode. | |
| &D2 lets modem react to DTR normally. | |
| &D3 resets the modem to default parameters. | |
COMMAND: | $Dn | |
VALUES: | n = 0 or 1 | |
DEFAULT: | $D0 | |
DESCRIPTION: | $D0 disables DTR Dialing. | |
| $D1 enables DTR Dialing. | |
COMMAND: | %DF | |
VALUES: | n = 0 or 1 | |
DEFAULT: | %DF0 | |
DESCRIPTION: | %DF0 selects V.34 Line Probe Data in Graph Format. | |
| %DF1 selects V.34 Line Probe Data in Table Format. | |
COMMAND: | %DP | |
34
