Multi-Tech Systems MT5600SMI-P92 manual Command +VTX Start Modem Transmit Playback, Example, 105

Chapter 7 – Voice Commands

Reporting Supported Range of Parameter Values:

	Command: +VTS=?
	Response: (<freq1> range), (<freq2> range), (<dur> range)
	Example: (200-3000),(200-3000),(0-255)
	OK
Result Codes:	OK Valid command.
Example 1.	ERROR The <string> command is invalid, or a selected frequency is out of range.
	This example illustrates tone generation without using any null elements.
	The command example is followed by a description of command execution.
	1.	AT+VTS= {!,30},1,2,[1000,1300,50],!,{*,6},[800,1300,50],9
		Hookflash with a duration of 300 ms.
	2.	Play DTMF 1 with duration given by the +VTD command.
	3.	Play DTMF 2 with duration given by the +VTD command.
	4.	Play tone pair at 1 000 Hz and 1 300 Hz with a duration of 500 ms.
	5.	Hookflash with duration given by the +VTD command.
	6.	Play DTMF * with duration of 60 ms.
	7.	Play tone pair at 800 Hz and 1300 Hz with duration of 500 ms.
Example 2.	8.	Play DTMF 9 with duration given by the +VTD command.
	This example illustrates tone generation using null elements. The command
	example is followed by a description of command execution.
	1.	AT+VTS=1,2,[1000,1300,50],[800],9
		Play DTMF 1 with duration given by the +VTD command.
	2.	Play DTMF 2 with duration given by the +VTD command.
	3.	Play tone pair at 1000 Hz and 1300 Hz with a duration of 500 ms.
	4.	Play tone pair at 800 Hz with duration given by the +VTD command.
Example 3.	5.	Play DTMF 9 with duration given by the +VTD command.
	This example illustrates tone generation using null elements and periods of
	silence. The command example is followed by a description of command execution.
	1.	AT+VTS=1,[,,50],2,[],9
		Play DTMF 1 with duration given by the +VTD command.
	2.	Play silence with duration of 500 ms.
	3.	Play DTMF 2 with duration given by the +VTD command.
	4.	Play silence with duration given by the +VTD command.
	5.	Play DTMF 9 with duration given by the +VTD command.

Command: +VTX	Start Modem Transmit (Playback)
Description:	This command causes the modem to start the voice transmission process.
Syntax:	+VTX
Result Codes:	CONNECT The modem accepts the command.
	ERROR The modem is not connected to at least one off-hook telephone line
	or one non-telephone line.

Command: +VGR	Voice Gain Receive (Record Gain)
Description:	This command causes the modem to set the gain for received voice samples.
Syntax:	+VGR=<gain> 0 (only valid number) selects automatic gain control

Reporting Current or Selected Values:

	Command: +VGR?
	Response: <gain>
	Example: 0 For the default setting.
Reporting Supported Range of Parameter Values:
	Command: +VGR=?
	Response: <gain> range
	Example: 0
Result Codes:	OK <gain> = 0.
	ERROR Otherwise, or if not in Voice Mode.

Multi-Tech Systems, Inc. SocketModem MT5600SMI Developer’s Guide 105