Multi-Tech Systems MT5600SMI-L92 Request Model Identification, Request Revision Identification

			Chapter 5 – AT Commands, S-Registers, and Result Codes
Command	+GMM	Request Model Identification
Description:		Causes the modem to report the modem product.
Typical Response:		+GMM: V92
Command:	+GMR	Request Revision Identification
Description:		Causes the modem to report the modem version, revision level, or date.
		This is the same as the I3 command.
Typical Response:		+GMR: P2109-V90
		OK
Command:	+GCAP	Request Complete Capabilities List
Description:		This extended-format command causes the modem to transmit one or
		more lines of information text listing additional capabilities command
		+<name>s, which is intended to permit the user to identify the overall
		capabilities of the modem. In particular, if the modem implements a
		particular modem control standard that uses Extended Syntax Commands,
		and if that modem control standard includes command(s) that indicate
		general capabilities, the +<names>(s) of those commands will be reported
		to the modem in response to a +GCAP command.
Example Responses:		+GCAP: +FCLASS, +MS, +ES, +DS, for a data modem that supports all
		capabilities listed. Where:
		+MS	+M commands (Modulation Control: +MS and +MR commands)
		+ES	+E commands (Error Control: +ES, +EB, +ER, +EFCS, +ETBM)
		+DS	+D commands (Data Compression: +DS and +DR). Manual
Command:	+GCI	Country of Installation
Description:		This extended syntax command selects and indicates the country of
		installation for the modem. This parameter selects the settings for any
		operational parameters that need to be adjusted for national regulations or
		telephone networks. The chapter Setting Country Codes for more
		information.
Default:		If the modem is specified for use in only one country, that country code is
		the default. Otherwise, the default is defined by the OEM. Factory default is
		B5 (United States).
Report Commands:		+GCI? Reports the current country code.
		+GCI=? Displays the list of available country codes.
Command:	&F	Restore Factory Configuration (Profile)
Description:		The modem loads the factory default configuration (profile). The factory
		defaults are identified for each command and in the S-Parameter
		descriptions. A configuration (profile) consists of a subset of S-Parameters.
Default:		None
Values:		&F0	Restore factory configuration 0.
		&F	Restore factory configuration 1.
Result Codes:		OK

ERROR if the modem is connected.

Multi-Tech Systems, Inc. SocketModem MT5600SMI Developer’s Guide 32