Multi-Tech Systems MT5600SMI-L92, MT5600SMI-XL34 manual FastConnect Commands, 92 +P and -Q Commands

		Chapter 5 – AT Commands, S-Registers, and Result Codes
FastConnect Commands
Command: $F	FastConnect Control
Description:	Allows configuring of the client modem to connect to a central site modem
	that supports non-standard V.22 and V.22 bis FastConnect protocols.
	Specifies the initial requested mode of operation when the modem is
	operating as the originator. The options are:
Defined Values:	$F0	Normal connection (Default)
	$F1	FastConnect without answer tone
	$F2	Reserved
	$F3	FastConnect with answer tone

V.92 +P and –Q Commands

This section describes the +P (PCM DCE) and –Q commands and parameters used to control the V.92 Mode operation.

Command: +PCW	Call Waiting Enable
Description:	Controls the operation of the modem in the presence of call waiting.
Defined Values:	+PCW0	Request modem-on-hold if enabled by +PMH and collect caller
		ID information if enabled by +VRID. Toggle V.24 circuit 125.
		(Default.)
	+PCW1	Hang-up.
	+PCW2	Ignore call waiting.
Result Codes:	OK
	ERROR
Report Commands:	+PCW?	Reports Selected Value(s).
		Response: +PCW: <value>
		Example: +PCW: 0 For the default setting.
	+PCW=?	Reports Supported Range of Parameter Values
		Response: +PCW: (<value> range)
		Example: +PCW: (0,1,2)

Command: +PMH	Modem-on-Hold Enable
Description:	Controls the selection of modem-on-hold in the modem. The action of the
	modem in response to modem-on-hold events is determined by the state of
	this command as well as the state of a negotiated handshake with a V.92-
	compliant server in V.92 Mode.
Defined Values:	+PMH0	Modem-on-hold enabled in V.92 Mode. (Default.)
	+PMH1	Disabled modem-on-hold.
Result Codes:	OK 0 or 1 in V.92 Mode (see the +MS command)
	ERROR
Report Commands:	+PMH?	Reports Current or Selected Value.
		Response: +PMH: <current value>
		Example: +PMH: 0 For the default setting.
	+PMH=?	Reports Supported Range of Parameter Values.
		Response: +PMH: (<value> range)
		Example: +PMH: (0,1)

Multi-Tech Systems, Inc. SocketModem MT5600SMI Developer’s Guide 71