Multi-Tech Systems MT5600SMI-L34, MT5600SMI-XL34, MT5600SMI-P92 manual Country Country Code, 114

Chapter 8 – Setting Country Codes

Chapter 8 – Setting Country Codes

The Default Country Code is B5.

If You Want to Change the Country Code

1.View the List of Available Country Codes by executing the command AT+GCI=?<CR>

2.Set and save the country code by executing the command AT+GCI=nn<CR> Note: nn is the country code.

3.OK is displayed.

4.The country code is then displayed (see the example below).

To Verify the Country Code

1.Type AT+GCI?<CR>, or you can type ATI5<CR>

Example

1.Type the command AT+GCI=B5<CR>

2.Verify B5 was set by typing AT+GCI?<CR> or ATI5<CR>

3.B5 indicates the configuration is set for any B5 country such as Canada or the United States, etc.

Country Codes Supported

The list below describes the country code settings for the countries that Multi-Tech currently supports.

Country	Country Code
Argentina	07
Australia	09
Austria	FD
Belgium	FD
Canada	B5
China	B5
Cyprus	FD
Czech Republic	FD
Denmark	FD
Finland	FD
France	FD
Germany	FD
Greece	FD
Hong Kong	99
Hungary	FD
Iceland	FD
Indonesia	99
Ireland	FD
Italy	FD
Japan	00
Korea	B5
Liechtenstein	FD
Luxembourg	FD
Mexico	B5
Netherlands	FD
New Zealand	7E
Norway	FD

Country	Country Code
Philippines	B5
Portugal	FD
Slovak Republic	FD
Spain	FD
Sweden	FD
Switzerland	FD
Taiwan	FE
United Kingdom	FD
United States	B5

Multi-Tech Systems, Inc. SocketModem MT5600SMI Developer’s Guide 114