Multi-Tech Systems MT5600SMI-32, MT5600SMI-XL34 manual Introduction, Product Description Region

Chapter 1 – Product Description and Specifications

Chapter 1 – Product Description and

Specifications

Introduction

The Multi-Tech SocketModem creates communication-ready devices by integrating data functionality into a single product design. The SocketModem is a space-efficient (1" × 2.5"), embedded modem that provides V.92 or V.34/33.6K data communication. The complete, ready-to-integrate modem dramatically reduces development time and costs for system designers. The SocketModem complies with telecom requirements, can be shipped worldwide, and is globally configurable.

This guide provides the hardware, software, and troubleshooting information needed to effectively integrate the SocketModem into your equipment. This guide also provides:

￿commands that the developer can use to configure and control a data modem and

￿Result codes that the modem issues in response to the commands.

Product Description

The MT5600SMI SocketModem is a standard 64-pin modem used for integrating data communications.

￿It is a single-port 3.3V modem, which integrates the controller, DSP, and DAA in a 1" x 2.5" form factor and communicates to a host controller via an asynchronous serial interface.

￿It is available with an 8-bit parallel interface.

This Developer's Guide covers all of the MT5600SMI products:

Product	Description		Region
MT5600SMI-32	V.32bis Serial Data/Fax 5V		Global
MT5600SMI-L32	V.32bis Serial Data/Fax 3.3V		Global
MT5600SMI-P32	V.32bis Parallel Data/Fax 5V		Global
MT5600SMI-34	V.34	Serial Data/Fax 5V	Global
MT5600SMI-L34	V.34	Serial Data/Fax 3.3V	Global
MT5600SMI-XL34	V.34	Serial Data/Fax 3.3V	Global
MT5600SMI-P34	V.34	Parallel Data/Fax 5V	Global
MT5600SMI-PL34	V.34	Parallel Data/Fax 3.3V	Global
MT5600SMI-92	V.92	Serial Data/Fax 5V	Global
MT5600SMI-L92	V.92	Serial Data/Fax 3.3V	Global
MT5600SMI-XL92	V.92	Serial Data/Fax 3.3V	Global
MT5600SMI-P92	V.92	Parallel Data/Fax 5V	Global
MT5600SMI-PL92	V.92	Parallel Data/Fax 3.3V	Global

How to Read the Product Codes in the Table Above:

32V.32bis/14.4K data rate

34V.34/33.6K data rate

92V.92/56K data rate

L 3.3 volt power input (default is 5V)

P Parallel interface (serial is default)

X Exclude LED pinouts

Multi-Tech Systems, Inc. SocketModem MT5600SMI Developer’s Guide 5