Multiquip DCA-100SSJU— OUTPUT TERMINAL PANEL OVERVIEW, Table of Contents, Single Phase

Models: DCA-100SSJU

1 92
Download 92 pages 52.01 Kb
Page 39
Image 39
FIGURE 27. Voltage

Table of Contents

DCA-100SSJU — OUTPUT TERMINAL PANEL OVERVIEW

Voltage Selector Switch- 3 Phase 480/277V Position The following are additional voltages available when the voltage selector switch is in the 3 phase 480/277V position. (See figure 26 below.)

FIGURE 27. Voltage

Selector Switch 270/120V

Single Phase

Position

Single Phase: 480V, 440V, or 416 Volt

The following connection, with the voltage selector switch locked into the 3 phase 480/277V position (See Figure 26), can offer SINGLE PHASE power at 480V, 440V, or 416V.

After hooking up the hard wires to the lugs as shown in figure 29 below, 480V will be the voltage with the Voltage Regulator Knob turned toward maximum. 440 volt will be reached when the Voltage Regulator Knob is turned down, and 416 volt when the Voltage Regulator Knob is toward the lowest setting (See Figure 27).

FIGURE 26. Voltage Selector Switch 480/277V Single Phase

FIGURE 29. Hard Wire Hookup for Single Phase 480V, 440V,

Position

or 416V

3 Phase, 480V, 440V, or 416 Volt

The following connection, with the voltage selector switch locked into the 3 phase 480/277V position (See Figure 26), can offer THREE PHASE power at 480V, 440V, or 416V.

After hooking up the hard wires to the lugs as shown in figure 28 below, 480V will be the voltage with the Voltage Regulator Knob turned toward maximum. 440 volt will be reached when the Voltage Regulator Knob is turned down, and 416 volt when the Voltage Regulator Knob is toward the lowest setting (See Figure 27).

Single Phase: 277V, 254V, or 240V

The following connection, with the voltage selector switch locked into the 3 phase 480/277V position (See Figure 26), can offer SINGLE PHASE power at 277V, 254V, or 240V.

After hooking up the hard wires to the lugs as shown in figure 30 below, 277V will be the voltage with the Voltage Regulator Knob turned toward maximum. 254 volt will be reached when the Voltage Regulator Knob is turned down, and 240 volt when the Voltage Regulator Knob is toward the lowest setting (See Figure 27).

FIGURE 28. Hard Wire Hook-up for Three Phase 480V, 440V,

FIGURE 30. Hard Wire Hookup for Single Phase 277V, 254V,

or 416V

 

or 240V

DCA-100SSJU — PARTS AND OPERATION MANUAL (STD)— REV. #2 (05/03/01) — PAGE 39

Page 39
Image 39
Multiquip DCA-100SSJU— OUTPUT TERMINAL PANEL OVERVIEW, Table of Contents, Single Phase: 480V, 440V, or 416 Volt