SAFETY MESSAGE ALERT SYMBOLS
FORYOUR SAFETY AND THE SAFETY OF OTHERS!
Lethal Exhaust Gases
Safety precautions should be followed at all times when installing or operating this equipment. Failure to read and understand the Safety Messages and Installation Instructions could result in injury to yourself and others.
This genset Installation Manual has been developed to provide
NOTEcomplete instructions for the safe implementation of MQ Power Gensets for field installation. Depending on the power plant you have selected, please refer to the
engine manufacturers instructions for data relative to its safe operations.
Before installing any MQ Power Genset, ensure that all authorized personnel have read and understands all installation or operating instructions referenced in this manual.
SAFETY MESSAGE ALERT SYMBOLS
The three (3) Safety Messages shown below will inform you about potential hazards that could injure you or others. The Safety Messages specifically address the level of exposure to the operator, and are preceded by one of three words: DANGER, WARNING, or CAUTION.
You WILL be KILLED or SERIOUSLY INJURED
if you DO NOT follow these directions.
You CAN be KILLED or SERIOUSLY INJURED if
you DO NOT follow these directions.
Engine exhaust gases contain poisonous carbon monoxide. This gas is colorless and odorless, and can cause death if inhaled. NEVER operate this equipment in a confined area or enclosed structure that does not provide ample free flow air.
Natural gas and liquid petroelum gas (LPG) can be also extremly dangerous if inhaled. They are odorless but a smell has been added to detect any leaks. IMMEDIATELY shut off the gas source if a leak is detected. If in an enclosed area, vacate the premises until the area is ventilated.
Explosive Fuel
Diesel fuel is extremely flammable, and its vapors can cause an explosion if ignited. DO NOT start the engine near spilled fuel or combustible fluids. DO NOT fill the fuel tank while the engine is running or hot. DO NOT overfill tank, since spilled fuel could ignite if it comes into contact with hot engine parts or sparks from the ignition system. Store fuel in
approved containers, in
Natural gas and LPG are extremely flammable and will explode and catch fire if exposed to sparks or flame. NEVER smoke in any area where gases are stored or supplied. IMMEDIATELY shut off the gas source if a leak is detected. Be certain that the area is well ventilated before exposing it to any mechanical or electrical device that may emit heat or sparks.
Burn Hazards
Engine components can generate extreme heat. To prevent burns, DO NOT touch these areas while the engine is running or immediately after operation. NEVER operate the engine with heat shields or heat guards removed.
You CAN be INJURED if you DO NOT follow these directions.
Potential hazards associated with MQ Power Gensets field installation will be referenced with Hazard Symbols which appear throughout this manual, and will be referenced in conjunction with Safety Message Alert Symbols.
Rotating Parts
NEVER operate equipment with covers or guards removed. Keep fingers, hands, hair and clothing away from all moving parts to prevent injury.
PAGE 6 — INDUSTRIAL GENERATOR SETS — APPLICATION & INSTALLATION MANUAL — REV. #4 (09/07/07)
