IMPORTANT SAFETY INSTRUCTIONS
Operation Safety
■ALWAYS be sure the operator is familiar with proper safety precautions and operations techniques before using generator.
■DO NOT allow unauthorized people near equipment.
■ALWAYS wear ear protection when working in a loud environment.
■NEVER run engine without air filter. Engine damage will occur.
■DO NOT leave the generator running in the MANUAL mode unattended.
■NEVER use accessories or attachments which are not recommended by MQ Power for this equipment. Damage to the equipment and/or injury to user may result.
■Manufacturer does not assume responsibility for any accident due to equipment modifications.
■ALWAYS check the machine for loosened parts or bolts before starting.
Emergencies
Always be prepared for an emergency such as fire, personnel injury, or other emergency situation. It is important to identify all possible emergency situations and to provide adequate prevention methods and response methods.
■Install the appropriate fire extinguishers in convenient locations. Consult the local fire department for the correct type of extinguisher to use. DO NOT use foam on electrical fires. Use extinguishers that are rated ABC by the National Fire Protection Association (NFPA).
■ALWAYS know the location of the nearest fire extinguisher.
■ALWAYS know the location of the nearest
first aid kit.
■ALWAYS provide an emergency escape route in the event of an emergency.
■In emergencies always know the location of the nearest phone or keep a phone on the job site. Also know the phone numbers of the nearest ambulance, doctor and fire department. This information will be invaluable in the case of an emergency.
Maintenance Safety
When performing maintenance on MQ Power generator sets, it is important to prevent automatic
Always disconnect the battery cable negative (first) before performing service on the generator. Reconnect battery cable negative (last) after service is complete.
■Keep the machinery in proper running condition.
■NEVER lubricate components or attempt service on a running machine.
■Always allow the machine a proper amount of time to cool before servicing.
■Fix damage to the machine immediately and always replace broken parts.
■Dispose of hazardous waste properly. Examples of potentially hazardous waste are used motor oil, coolant, fuel, and fuel filters.
■DO NOT use plastic containers to dispose of hazardous waste.
■DO NOT pour waste, oil, coolant or fuel directly onto the ground, down a drain, or into any water source
■Whenever necessary, replace nameplate, operation and safety decals when they become difficult read.
■Never leave rags or tools on or near the
■Refer to the Volvo Engine Owner's Manual for engine technical questions or information.
PAGE 10 — INDUSTRIAL GENERATOR SETS — APPLICATION & INSTALLATION MANUAL — REV. #4 (09/07/07)
