Napoleon Fireplaces BGD36CFGN Clean Face Surround Minimum Enclosure Clearances, Convex Concave

27

CLEAN FACE SURROUND MINIMUM ENCLOSURE CLEARANCES

**

FIGURE 82

FIGURE 81

NOTE:

**Installation requires a minimum 6 1/2" of non-combustible facing above the top of the fireplace.

OPTIONAL CLEAN FACE SURROUND INSTALLATION BGD36CF(G) ONLY

FIGURE 83 FIGURE 84 FIGURE 85

WAVE	CONVEX	CONCAVE
S36WN (BROWN)	S36CVN (BROWN)	S36CCN (BROWN)
S36WP (PEWTER)	S36CVP (PEWTER)	S36CCP (PEWTER)

Installation requires a minimum of 6 1/2" non-combustible facing material at the top of the fi replace. Refer to either Figure 86a or Figure 86b (depending on your installation) to ensure your fi replace has been installed with the proper requirements for this kit.

Whether installing to a fi nished fl oor or a hearth, a 3/8" clearance must be maintained at the bottom of the clean face surround kit. To obtain this clearance a fi replace riser is required.

FINISHED FLOOR INSTALLATION

When installing to a fi nished fl oor the fi replace riser must create a minimum clearance of 3 3/8" from the fi nished fl oor to the bottom of the fi replace.

						FIGURE 86a
			COMBUSTIBLE
	STEEL		MATERIAL		STEEL
	HEADER		NON-COMBUSTIBLE		HEADER
STAND-OFF			MATERIAL		STAND-OFF
			6 1/2” MINIMUM
CLEAN FACE SURROUND KIT
			37 3/8”
			CLEAN FACE			FIREPLACE
			SURROUND			RISER
				KIT
FINISHED	3/8”	3 3/8”	FIREPLACE	3/8”	3 3/8”	FINISHED
FLOOR	CLEARANCE		RISER	CLEARANCE		FLOOR
						W415-0661 / C / 02.20.08