5-59
102. [Configuration for ft Series] dialog box, specify/register configuration information
including the names of computers to be managed, and then write the information to FD as
the following filename:
<Filename>
CSL_LESS.CFG
The setting items of the server are as follows:
Computer Name (The managed server name. Arbitrary)
IP address
Subnet mask
Default gateway
Primary contact (Management PC’s IP address)
103. Right-clicking the server name to open the pop-up menu, from which select [Property]
command to open [Property] dialog box.
104. When the [Property] dialog box appears: specify the items as follows:
<[ID] page>
Connection mode: LAN
<[Alert notification] page>
Uncheck [Use Default
Settings] and check [Reset] of
[Activate].
105. Right-clicking the server
name to open the pop-up
menu and select [Open
Remote Console] to open
[MWA Remote Console].
106. Select the [Action at Remote Console Connect] command from the popup menu displayed
by right-clicking the server window to display the [Action at Remote Console Connect]
dialog box. Then select [Go MWA mode].
107. Insert NEC EXPRESSBUILDER CD-ROM into the drive of the computer to be managed
and insert floppy disk storing the configuration information (CSL_LESS.CFG) into the
FDD drive.